13.3 Inch Tft Lcd Display 1920x1080 Ips Viewing Angle Edp Interface 30 Pins
General Description:
NE133FHM-N57 can display16.7M (8bit) colors and color gamut 100%. The TFT-LCD panel used for this module is a low reflection and higher color type. Therefore, this module is suitable for Notebook PC.
Features:
1.2 lane eDP interface with 2.7Gbps link rates
2.Thin and light weight
3.16.7M (8bit) color depth, color gamut 100%DCI-P3 ( CIE1931 )
4.Data enable signal mode
5.Side mounting frame
6.Green product (RoHS & Halogen free product)
7.Low driving voltage and low power consumption
8.On board EDID chip
Specifications:
| Parameter |
Specification |
Unit |
| Active area |
293.76(H) ×165.24 (V) |
mm |
| Number of pixels |
1920 (H) ×1080 (V) |
pixels |
| Pixel pitch |
51 x 153 |
um |
| Pixel arrangement |
RGB Vertical stripe |
|
| Display colors |
16.7M (8bit) |
|
| Color gamut |
DCI-P3 100% Typ,95%Min |
|
| Display mode |
Normally Black |
|
| Dimensional outline |
298.76 ±0.3(H)*181.33 ±0.5(V)
(W/PCB)*2.377(Max)
|
mm |
| Weight |
172.2(max) |
g |
| Surface treatment |
HC |
|
| Surface hardness |
3H |
|
| Back-light |
Lower Down side, 1-LED Lighting Bar type |
|
|
Power consumption
|
PD: 0.39(Max) |
W |
| PBL: 3.5(Max) |
W |
| PTotal : 3.89(Max) |
W |
Absolute Maximum Ratings:
| Parameter |
Symbol |
Min. |
Max. |
Unit |
| Supply Voltage |
VDD
|
-0.3 |
4.0 |
V |
| eDP input Voltage |
VeDP |
0 |
2.0 |
V |
| Logic Supply Voltage |
VIN
|
VSS-0.3 |
VDD+0.3 |
V |
| Operating Temperature |
TOP
|
0 |
+50 |
°C |
| Storage Temperature |
TST
|
-20 |
+60 |
°C |
Electrical Specifications:
| Parameter |
Min. |
Typ. |
Max. |
Unit |
| Power Supply Voltage |
VDD
|
390 |
3.3 |
3.6 |
V |
|
Permissible Input Ripple Voltage
|
VRF
|
-
|
-
|
300
|
mV
|
| Power Supply Inrush Current |
Inrush |
- |
- |
2 |
A |
|
Power Supply Current
|
Mosaic |
IDD
|
- |
- |
119 |
mA |
| RGB |
- |
- |
119 |
mA |
|
Power Consumption
|
Mosaic |
PM
|
- |
- |
0.39 |
W |
| RGB |
PRGB
|
- |
- |
0.39 |
W |
| BLU |
PBL
|
- |
- |
3.5 |
W |
| Total |
PTotal
|
- |
- |
3.89 |
W |
Interface Connection:
| Terminal |
Symbol |
Functions |
| Pin No. |
Symbol |
Description |
| 1 |
GND |
Ground |
| 2 |
Lane1_N |
eDP RX channel 1 negative |
| 3 |
Lane1_P |
eDP RX channel 1 positive |
| 4 |
GND |
Ground |
| 5 |
Lane0_N |
eDP RX channel 0 negative |
| 6 |
Lane0_P |
eDP RX channel 0 positive |
| 7 |
GND |
Ground |
| 8 |
AUX_CH_P |
eDP AUX CH positive |
| 9 |
AUX_CH_N |
eDP AUX CH negative |
| 10 |
GND |
Ground |
| 11 |
LCD_VCC |
Power Supply, 3.3V (typ.) |
| 12 |
LCD_VCC |
Power Supply, 3.3V (typ.) |
| 13 |
BIST |
Self Test |
| 14 |
GND |
Ground |
| 15 |
GND |
Ground |
| 16 |
HPD |
Hot plug detect output |
| 17 |
NC |
No Connection |
| 18 |
NC |
No Connection |
| 19 |
FB1 |
LED Current Feedback |
| 20 |
FB2 |
LED Current Feedback |
| 21 |
FB3 |
LED Current Feedback |
| 22 |
FB4 |
LED Current Feedback |
| 23 |
FB5 |
LED Current Feedback |
| 24 |
FB6 |
LED Current Feedback |
| 25 |
NC |
No Connection |
| 26 |
NC |
No Connection |
| 27 |
VLED |
LED Power Supply |
| 28 |
VLED |
LED Power Supply |
| 29 |
VLED |
LED Power Supply |
| 30 |
VLED |
LED Power Supply |
Optical Specification:
| Parameter |
Symbol |
Condition |
Min. |
Typ. |
Max. |
Unit |
|
Viewing Angle
Range
|
Horizontal |
Θ3
|
CR > 10
|
80 |
85 |
- |
Deg. |
| Θ9 |
80 |
85 |
- |
Deg. |
| Vertical |
Θ12
|
80 |
85 |
- |
Deg. |
|
Θ6
|
80 |
85 |
- |
Deg. |
| Luminance Contrast Ratio |
CR |
Θ = 0° |
800 |
1000 |
- |
|
| Luminance of White |
center |
Yw
|
Θ = 0° ILED = 19.7mA
|
312 |
390 |
468 |
cd/m2 |
| White Luminance Uniformity |
5 Points |
ΔY5 |
- |
- |
- |
% |
| 13 Points |
ΔY13 |
70% |
- |
- |
% |
|
White Chromaticity
|
CCT |
Θ = 0° |
6300 |
6800 |
7500 |
|
| MPCD |
-5 |
10 |
25 |
|
|
Reproduction of Color
|
Red |
Rx
|
Θ = 0°
|
Typ.-0.03
|
0.680 |
Typ.+0.03
|
|
| Ry |
0.318 |
|
| Green |
Gx
|
0.256 |
|
|
Gy
|
0.703 |
|
| Blue |
Bx
|
0.151 |
|
|
By
|
0.046 |
|
| Color Gamut |
DCI-P3 |
|
95 |
100 |
- |
% |
| Response Time(Rising+Falling) |
TRT |
Ta= 25℃Θ=0°
|
-
|
60 |
-
|
ms |
| Cross Talk |
CT |
Θ = 0° |
- |
- |
2.0 |
% |
Handling Precautions:
1.As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible.
2.As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided.
Product Tags:
|
|
EDP TFT Color LCD Display 13.3 Inch Viewing Angle 30 Pins IPS 1920x1080 Panel Images
|
